::..STBSL..::

New Bulk Update for Cyclone Box is ready, this includes:

1. New Cyclone Box Firmware v1.06 is avaiable on our server, upgrade it through Box Maintenance

- BB5 Booting for 5800,N97,5220 and others fixed
- Fixed problem when box has been hanging up during BB5 boot
procedure.
- Meaning of "Repower on boot" button has been inverted. That means,
BB5 phones are now by default repowered during boot (more stability
while dealing with dead / stucked / unbootable phones).
- Fixed box stability during 1208 flash and CP extract, no more
"Failed to set Flashbus baud"
- General Improved FBUS Stack stability
- Code revised
- Small speed improvment during BB5 TX2 Flashing
- Minor changes/bugfixes

2. Support for new DCT4Plus phones unlock/relock/autolock:

RM-305 1650 v5.91
RH-105 1208 v5.91
RH-105 1209 v5.91
RM-298 2630 v7.60
RM-299 2630b v7.60
RM-258 2760 v7.60
RM-258 2760b v7.60
RH-64 1600 v6.46
RH-92 1100ib v6.46
RH-93 1100i v6.46
RM-291 v06.81 (missing partial)

5. New DCT4 Loaders v7.49.00 introduced, this adds support for new flash chips.

6. Added new DCT4 UEM CBUS Loaders - ASIC11 UEM IMEI Read problems fixed.

7. New BB5 Loaders introduced, adds support for new flash chips. Note that greatly speed improvment was noticed during flash RAP3v3 phones with "slow" samsung flash chip - 00ec2208 - this includes 5200,5310,etc.

8. Old updates also included in this bulkupdater, this includes BB5 RAPIDO NCK Calculator, and DCT4Plus Unlock patches released before (after installer):

RM-392 2680 v6.17
RM-393 2680b v6.17
RM-392 2680 v5.28
RM-393 2680 v5.28
RM-362 5000d v6.31
RM-363 5000db v6.31

Download bulkupdater from : [Only Registered and Activated Users Can See Links. Click Here To Register...]
Size - 15MBytes
(trafficshare download, you don't need have rapidshare account to download updater).
Run it and click INSTALL, all patches will be applied automaticlly.

GSM-POWER

13-08-2009 Next Bulk Update, RAPU-YAMA supported for FBUS Flash


Hello,
New BULK UPDATE for Cyclone Box is avaiable, changelog:




Example 5630 RAPU Flashed:



Note on flashing RAPU units: make sure you obtained CORRECT FBUS CABLE! UFC No.2 (As we tested) NOT working with RAPU phones, because MBUS line is duplicated. We recommend to use GPG FBUS cables, as we done our tests using their cables.

This is BULK UPDATE, that means you need to download EXE file and click INSTALL. All previously released updates (few days before, rapido nck calc, etc) will be applied automaticlly, loaders will be purged too. You need have only installed installer (this one released in May, avaiable in [Only Registered and Activated Users Can See Links. Click Here To Register...])

Download new update from: [Only Registered and Activated Users Can See Links. Click Here To Register...]

__________________

RIB@T

Hi,
Bulk update 11-09-2009 for Cyclone Box is READY.

Added support for unlock/relock/autolock of DCT4+ Asic 3168 phones, supported models/versions for now:

7100s RM-438 v5.22
7100s RM-438 v5.41
7100s RM-438 v6.31
2330c RM-512 v6.46
2330c RM-512 v6.75
2323c RM-543 v8.20
2323c RM-543 v6.75
2323c RM-543 v6.46
2630 RM-298 v57.20
2720 RM-519 v8.20

Not supported model/version of ASIC3168 phone here? Send us MCU File and we will update it !

Unlocking is FREE.
It is FIRST standalone solution (without usage of internet).
Before usage it is very important to UPGRADE YOUR BOX FIRMWARE (to version 1.07).

However, we added new service called "Super DCT4" inside a box.
To unlock ASIC 3168 phones, your box needs be "Super DCT4" activated (this will also let you change DCT4/plus IMEI in future).
The activations is done automaticlly in "Credits" tab and cost 50 credits - keep note that with box, comes 100 credits that mean if you haven't spend all logs on DCT4 RPLs, activation is FREE.

Download link:[Only Registered and Activated Users Can See Links. Click Here To Register...]
How to check if my box is Super DCT4 Activated?
New build of sw showing this automaticlly upon launching DCT4/WD2 module, example:
How to activate Super DCT4 in my box?
It is very simple. Go to "Credits" module (same as you are using for calculating ASK/RPL), and click big "Activate SUPER DCT4" button. In seconds you should see similiar message:

As message says, replug your box and re-upgrade it again. After re-upgrade your box is SUPER-DCT4-READY

And here is some unlocked phones...

Best Regards,
Cyclone Team.