Frequently asked questions (faq). Tips and tricks.

[TUR@N ALAM]

FLASHING OF S1-OPEN PDA PHONES (Satio,Vivaz,Vivaz pro)

download needed firmware package.
add it to firmware area on PDA tab.
DO NOT UNZIP PACKAGE, JUST ADD IT AS IS.
on settings,check "signed mode"
press flash

connect turned off phone while holding "green" button.

FLASHING OF S1-ANDROID PDA PHONES (x10,x10 mini,x10 mini pro,etc)

download needed firmware package.
add it to firmware area on PDA tab.
UNPACK PACKAGE, ADD *.file_set to firmware area
on settings,check "signed mode"
press flash

connect turned off phone while holding "BACK" button.

[TUR@N ALAM]

UNLOCKING OF S1-OPEN PDA PHONES

select USB as interface. that is REQUIRED.
select phone model
settings - check ONLY "signed mode (using server)", "do full unlock instead of usercode reset", fill your login details.

back to original tab, press unlock, "GREEN BUTTON"

if signature is calculated - you will receive 'SUCCESS' response, otherwise you will receive error code.
if calculation is success, then signature will be saved in backup\%imei% folder in your setool2 directory.

next, backup will be created so you will be able to restore phone if something will go wrong.

procedure will continue,phone will be switched off and unlocked.

remember, if something will go wrong - you have a backup of security units.

please check "credits consumption" FAQ post for info about number of credits.

UNLOCKING OF S1-ANDROID PDA PHONES

select USB as interface. that is REQUIRED.
select phone model
settings - check ONLY "signed mode (using server)", "do full unlock instead of usercode reset", fill your login details.

back to original tab, press unlock, hold "BACK BUTTON" and insert cable to powered off phone.

if signature is calculated - you will receive 'SUCCESS' response, otherwise you will receive error code.
if calculation is success, then signature will be saved in backup\%imei% folder in your setool2 directory.

next, backup will be created so you will be able to restore phone if something will go wrong.

procedure will continue,phone will be switched off and unlocked.

remember, if something will go wrong - you have a backup of security units.

please check "credits consumption" FAQ post for info about number of credits.

please note, that network unlock for S1-ANDROID PDA is not availabe for public at the moment


GESTURE LOCK RESET OF S1-ANDROID PDA PHONES

check signed mode only, press unlock.
hold "BACK BUTTON" and insert cable to powered off phone.

if X10 has blocked attempts counter, then you need reflash phone after gesture lock reset.

[TUR@N ALAM]

POSSIBLE PROBLEMS

DB200X+NEXPERIA

damaged SCRC (imei mismatch), damaged seczone, damaged gdfs

1. go to emptyboard tab
2. select model
3. on settings, check "signed mode", fill login details
4. press reset, connect phone
5. if gdfs structure okay, skip that step, otherwise add to firmware are gdfs in ssw format: one of

DB2001_G700_GDFS_IN_SSW_FORMAT.SSW
DB2001_M600_GDFS_IN_SSW_FORMAT.ssw
DB2001_P1_GDFS_IN_SSW_FORMAT.ssw
DB2001_P990_GDFS_IN_SSW_FORMAT.ssw

6. add to firmware area correct EROM

for m600,w950,p990: pda_ccpu_convert_red49_BROWN_CID49_DB2001.software
for w960,p1da_ccpu_convert_red53_BROWN_CID49_DB2001.software

7. press flash
8. reflash phone on usual PDA tab if needed.

phone could not boot using dcu60, erom version timeout error,etc

acpu erom damaged, to restore it

1. select correct PDA model
2. find corresponding EROM in dist\eroms\, add it to firmware area
3. select correct com/ufs port
4. press recovery
5. connect turned off phone
6. reflash phone via USB with normal firmware

S1 OPEN

phone could not boot and blinks red

unlock phone using full signature unlock

phone stuck on white screen

reflash phone

phone stuck on white screen,reflashing and unlocking not helps

i will think something later