Un sony ericson whit out box its real now

[kaluc]

List of compatible models above : IMAGE: [Only Registered and Activated Users Can See Links. Click Here To Register...]


-K510, k608, K618, K750, k790, k800, w300, W550, W810, w850, W880.

Instructions:

1 - Download the firmware package for all Sony Ericsson models.

********Links: [Only Registered and Activated Users Can See Links. Click Here To Register...]

2 - downloads

********Links: [Only Registered and Activated Users Can See Links. Click Here To Register...]

3 - Unzip the firmware that matches your model in a separate folder because we will need to unlock it with Setool 1.11 and a usb cable for your Sony Ericsson.

Flashing and unlocking Gsm:

4 - Make a backup of GDFS by clicking on "READ GDFS" and not write GDFS!

5 - Select your model, if it is a db 2020, checked "Bypass DB2020 security". Down select USB.
*
IMAGE: [Only Registered and Activated Users Can See Links. Click Here To Register...]

6 - Select your firmware by clicking "add". It should flash the "hand" and "fs". So add these two files.

* IMAGE: [Only Registered and Activated Users Can See Links. Click Here To Register...]

7 - In "misc files" click the three dots and select your file Remove simlock.vpk.

IMAGE : [Only Registered and Activated Users Can See Links. Click Here To Register...]

8 - Click on "FLASH". You must connect your mobile phone in flash mode *. The flash should now begin.

IMAGE : [Only Registered and Activated Users Can See Links. Click Here To Register...]
*
9 - During a flash Setool arrêterra is giving this message (see next photo). So unplug your mobile phone, remove and reinsert the battery. Then press "READY" and reconnect your mobile phone in flash mode *

IMAGE : [Only Registered and Activated Users Can See Links. Click Here To Register...]

10 - The flash continues ....

IMAGE : [Only Registered and Activated Users Can See Links. Click Here To Register...]

11 - Setool will then stop still will be asked "press Yes to remove, NO to apply". He requested the write confirmation Remove the simlock patch. Select NO to apply.
*
IMAGE : [Only Registered and Activated Users Can See Links. Click Here To Register...]

12 - Once finished with Setool, it says "Elapsed: xxx Secs. "Unplug your mobile phone.

IMAGE : [Only Registered and Activated Users Can See Links. Click Here To Register...]

13 - The mobile phone is flashed but not finalized, it still lacks a file. It is not necessary to restart the mobile phone has the time, but he would say, 'error contacting network .....' due to lack of completion of the file needed to setool2 usual.



Start XS + and click "CONNECT", and connect your mobile phone to flash mode *. Your mobile phone is automatically recognized.

IMAGE : [Only Registered and Activated Users Can See Links. Click Here To Register...]

14 - Tick "Customize File System", select your model of mobile phone, and you cda (2 europe often for France). Click on "FLASH"

IMAGE : [Only Registered and Activated Users Can See Links. Click Here To Register...]

15 - Once XS + indicates "disconnect, unplug the phone" unplug your mobile phone, finished!

IMAGE : [Only Registered and Activated Users Can See Links. Click Here To Register...]


ENJOY IT WHIT A JUIC DRINK