Dhaka Mobile 

Logo 




Go Back  

Dhaka Mobile > GSM Mobile / Tablets Brands -Software Area > Smart Phones & PDA/PALM Organizers > Smartphones ( WM Without Touchscreen)

Connect with Facebook
Register Unlock support Online Shop Members List Calendar Mark Forums Read

Smartphones ( WM Without Touchscreen) HTC, I-mate, Qtek, HP, Hitachi, and many other SmartPhones windows CE base devices

Reply
 
Thread Tools Display Modes
Old 19-02-09, 12:08 PM   #11
kushol
Freak Poster
 
kushol's Avatar
 
Join Date: Nov 2008
Location: WINDOWS++
Age: 36
Posts: 224
Status: Offline
Sonork:
Thanks: 33
Thanked 521 Times in 135 Posts
Rep Power: 9
kushol is on a distinguished road
Default Re: "All Smart Phones & PDA/PALM Hard & Soft Reset Key Total InfoHere with picture"

Palm


Palm Treo 755p

Resetting Your Treo Device

Soft Reset

Performing a soft reset is similar to restarting a computer. If your Treo device is not responding or you’re having trouble synchronizing with your computer, a soft reset may help. All your information is retained when you perform a soft reset.

1. Remove the battery from your device, and then reinsert it.

Note: The reset begins when you insert the battery and ends when the Date & Time Preferences screen appears.

2. Select Done.System Reset

Replacing the Battery

Your Treo device comes with a replaceable battery. Be sure to use a battery that is approved
by Sprint and that is compatible with your device. Failure to use the proper battery may
result in personal injury or product damage, and it voids your device warranty.





5. Insert the new battery into the compartment at a 45-degree angle, pressing it into place. Slide the battery door onto the back of the device until it clicks into place.
6. Connect your device to the charger or sync cable.
7. Wait for your device to turn on, and then enable the network time or set the date and time when prompted.

Note: Be sure to dispose of your old battery properly. In some areas, disposal in household or business trash is prohibited.

1. Press Power/End to turn off the screen.
2. Press the Battery Door Release and slide the battery door downward to remove it from your device.
3. Place a finger in the notch next to the battery and lift the battery up at a 45-degree angle to remove it from the compartment.
4. Align the metal contacts on the new battery with the contacts inside the battery compartment.


A system reset, also called a safe or warm reset, can be useful if your device loops or freezes during a soft reset. Performing a system reset allows you to get out of the loop and restores limited functionality to your device in order to uninstall a third-party application that’s
causing the problem. Note that after a system reset, you must perform a soft reset to restore full functionality, including the wireless features, to your device.

1. Remove the battery from your device.
2. Press and hold Up on the 5-way while reinserting the battery.
3. When Date & Time Preferences appears, then release Up
4. Delete the third-party application that you suspect is causing the problem.
5. Perform a soft reset. (The wireless features of your device are not available until you
complete this step.)

Hard Reset

A hard reset erases all information and third-party software on your Treo device. Never perform a hard reset without first trying a soft and a system reset. You can restore previously synchronized information the next time you synchronize.


Note: Your device might not re-establish a Sprint Vision session after a hard reset. To manually establish a new Sprint Vision session, open the Web browser to access a Web site.

A hard reset can tell you if a problem stems from your Treo device or from an application installed on it. If you do not experience the problem after you perform a hard reset, the
problem is related to software you installed.

Important: If you set a password on your device, performing a hard reset reformats your device. This is a more severe form of a hard reset, which removes all your information, and restores your formats, preferences, and other settings to the factory default settings.

Note: Some third-party applications do not create a backup on your computer when you synchronize. If you perform a hard reset, you may lose data in these applications and you need to reinstall these applications after the hard reset. Please contact the developer to find out which information is backed up during synchronization.

1. Remove the battery from your device.
2. Press and hold Power/End while reinserting the battery.
3. When the Access Powered logo appears, release Power/End .
4. When the “Erase all data?” prompt appears, press Up to confirm the hard reset.
5. If a “Reformatting in progress” message appears, do not touch your device until the
process is complete. This may take up to ten minutes.
6. Follow the onscreen instructions to align the screen and set the date and time.
7. (Optional) If you want to confirm that the hard reset was successful, press Applications and select HotSync (If you see your device name in the upper-right corner, the hard reset was not successful. If you do not see your device name, then the reset was successful.)
8. Sync to restore any previously synchronized information.
:045:

Last edited by kushol; 19-02-09 at 12:14 PM.
  Reply With Quote
Old 19-02-09, 12:48 PM   #12
kushol
Freak Poster
 
kushol's Avatar
 
Join Date: Nov 2008
Location: WINDOWS++
Age: 36
Posts: 224
Status: Offline
Sonork:
Thanks: 33
Thanked 521 Times in 135 Posts
Rep Power: 9
kushol is on a distinguished road
Default Re: "All Smart Phones & PDA/PALM Hard & Soft Reset Key Total InfoHere with picture"

O2


O2 XDA Orbit

Resetting Your Pocket PC Phone
Occasionally, you may need to reset your device. A normal (or soft) reset of your device clears all active program memory and shuts down all active programs. This can be useful when your device is running slower than normal, or a program is not performing properly. A soft reset is also necessary after the installation of some programs. If a soft reset is performed when programs are running, unsaved work will be lost.
You can also perform a hard reset (also known as a full reset). A hard reset should be performed only if a normal reset does not solve a system problem. After a hard reset, the device is restored to its default settings — the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on your device will be lost. Only Windows Mobile software and other pre-installed programs will remain.
To perform a soft reset
• Use the stylus to press the RESET button found on the lower left side of your device. Your device restarts and displays the Today screen.







1. Press and hold the Left SOFT KEY and the Right SOFT KEY, and at the same time, use the stylus to press the RESET button at the lower left side of your device.
2. Release the stylus, but continue pressing the two soft key buttons. Release them only when you see the following message on your device screen: “Press Send to restore manufacturer default, or press other keys to cancel.“
3. Press on your device. Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs an
  Reply With Quote
Old 19-02-09, 04:46 PM   #13
kushol
Freak Poster
 
kushol's Avatar
 
Join Date: Nov 2008
Location: WINDOWS++
Age: 36
Posts: 224
Status: Offline
Sonork:
Thanks: 33
Thanked 521 Times in 135 Posts
Rep Power: 9
kushol is on a distinguished road
Default Re: "All Smart Phones & PDA/PALM Hard & Soft Reset Key Total InfoHere with picture"

O2


O2 XDA Argon

O2 XDA Argon soft reset

Resetting Your Pocket PC Phone

Occasionally, you may need to reset your device. A normal (or soft) reset
of your device clears all active programme memory and shuts down all
active programmes. This can be useful when your device is running slower than normal, or a programme is not performing properly. A soft reset is also necessary after the installation of some programmes. If a soft reset is performed when programmes are running, unsaved work will be lost.
You can also perform a hard reset (also known as a full reset). A hard
reset should be performed only if a normal reset does not solve a system
problem. After a hard reset, the device is restored to its default settings - the way it was when you first purchased it and turned it on. Any programmes
you installed, data you entered, and settings you customised on your
device will be lost. Only Windows Mobile software and other pre-installed
programmes will remain.

To perform a soft reset

• Use the stylus to press the RESET button found at the bottom of your
device. Your device restarts and displays the Today screen.



O2 XDA Argon hard reset




To perform a hard reset

1. Press and hold the left SOFT KEY and the right SOFT KEY, and at the

same time, use the stylus to press the RESET button at the bottom of

your device.

2. Release the stylus, but continue pressing the two SOFT KEYs until you

see the following message on the screen:


3. Release the two SOFT KEYs, and then press the button on your


device.

Warning! Your device will be set back to factory default settings. Please ensure any additional installed programmes and/or user data have been backed up before a hard reset is performed.
  Reply With Quote
Old 19-02-09, 04:50 PM   #14
kushol
Freak Poster
 
kushol's Avatar
 
Join Date: Nov 2008
Location: WINDOWS++
Age: 36
Posts: 224
Status: Offline
Sonork:
Thanks: 33
Thanked 521 Times in 135 Posts
Rep Power: 9
kushol is on a distinguished road
Default Re: "All Smart Phones & PDA/PALM Hard & Soft Reset Key Total InfoHere with picture"

O2



O2 XDA Atom Life

O2 XDA Atom Life soft reset

Resetting your O2 Xda Atom Life

If your O2 Xda Atom Life responds slowly, stops responding, or freezes, you can reset it in two ways: a soft reset or a hard reset.

Soft reset

A soft reset causes the O2 Xda Atom Life to restart and adjust memory allocation. Your O2 Xda Atom Life returns to the same
status as the last time you used it, though unsaved data in any opened applications may be lost. To perform a soft reset, use the stylus to press and hold the Reset button.



9. Soft reset Press here with the stylus to soft reset your phone.

O2 XDA Atom Life hard reset


Hard reset

A hard reset turns the battery off, clears memory, deletes all data (such as owner information under Setup Wizard and AutoConfigurator) and restores the Xda Atom Life to its default settings. The action will keep all the preinstalled programs that were in the phone when your Xda Atom Life was first delivered to you. It is therefore extremely important to back up data to a storage card or your computer on a regular basis in case a hard reset has to be performed.

To perform a hard reset:

1. Make sure that you have backed up all your data in a Mini SD card or on your PC before performing a hard reset.

2. Press and hold the power button, and then use the stylus to press the soft reset button at the same time.
  Reply With Quote
Old 19-02-09, 04:56 PM   #15
kushol
Freak Poster
 
kushol's Avatar
 
Join Date: Nov 2008
Location: WINDOWS++
Age: 36
Posts: 224
Status: Offline
Sonork:
Thanks: 33
Thanked 521 Times in 135 Posts
Rep Power: 9
kushol is on a distinguished road
Default Re: "All Smart Phones & PDA/PALM Hard & Soft Reset Key Total InfoHere with picture"

O2


O2 XDA Orbit 2

O2 XDA Orbit 2 soft rese
t

Resetting Your Device

Soft reset

Occasionally, you may need to reset your device. A soft (or normal) reset
of your device clears all active program memory and shuts down all
active programs. This can be useful when your device is running slower
than normal, or a program is not performing properly. A soft reset is
also necessary after the installation of some programs. If a soft reset is
performed when programs are running, unsaved work will be lost.

To perform a soft reset

Use the stylus to press the RESET button found at the bottom of your
device. Your device restarts and displays the Today screen.


O2 XDA Orbit 2 hard reset

Resetting Your Phone

Hard reset
You can also perform a hard reset (also known as a full reset). A hard
reset should be performed only if a normal reset does not solve a system
problem. After a hard reset, the device is restored to its default settings—
the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on your device will be lost. Only Windows Mobile® software and other pre-installed programs will remain.

Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.
Important If Encrypt files placed on storage cards is or was enabled before, then backup all files from the storage card before using Clear Storage, performing a hard reset, or updating the ROM system software. Otherwise you will no longer be able to access the encrypted files on the storage card. Use ActiveSync or Windows Mobile Device Center to transfer files between your storage card and computer. After the procedure, copy your files back to the storage card.

To perform a hard reset

1. Press and hold the GPS/MESSAGING and INTERNET EXPLORER
buttons, and at the same time, use the stylus to press the RESET
button at the bottom of your device.
2. Release the RESET button, but continue pressing the GPS/ MESSAGING and INTERNET EXPLORER buttons until you see this message on the screen:



3. Release the buttons, and then press SEND on your device to perform
the hard reset, or press any other button to cancel the reset.


Clear Storage

Another way of clearing the device storage and reset all settings back to
factory default settings is to use the Clear Storage feature. You will lose all your data and files on the device storage when you use Clear Storage, so make sure to do a backup first.
Important If Encrypt files placed on storage cards is or was enabled before, then backup all files from the storage card before using Clear Storage, hard reset or updating the ROM system software. Otherwise you will no longer be able to access the encrypted files on the storage card. Use ActiveSync or Windows Mobile Device Center to transfer files between your storage card and computer. After the procedure, copy your files back to the storage card.

1. Tap Start > Settings > System tab > Clear Storage.
2. Enter “1234” then tap Yes.
  Reply With Quote
Old 19-02-09, 05:00 PM   #16
kushol
Freak Poster
 
kushol's Avatar
 
Join Date: Nov 2008
Location: WINDOWS++
Age: 36
Posts: 224
Status: Offline
Sonork:
Thanks: 33
Thanked 521 Times in 135 Posts
Rep Power: 9
kushol is on a distinguished road
Default Re: "All Smart Phones & PDA/PALM Hard & Soft Reset Key Total InfoHere with picture"

O2


O2 XDA Trion

O2 XDA Trion Soft reset


Resetting Your Pocket PC Phone
Occasionally, you may need to reset your device. A normal (or soft) reset of your device clears all active program memory and shuts down all active programs. This can be useful when your device is running slower than normal, or a program is not performing properly. A soft reset is also necessary after the installation of some programs. If a soft reset is performed when programs are running, unsaved work will be lost. You can also perform a hard reset (also known as a full reset). A hard reset should be performed only if a normal reset does not solve a system problem. After a hard reset, the device is restored to its default settings — the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on your device will be lost. Only Windows Mobile software and other pre-installed programs will remain.
To perform a soft reset
• Use the stylus to lightly press and hold the RESET button onthe bottom of your device. Your device restarts and displays the Today screen.



O2 XDA Trion hard reset

To perform a hard reset
Press and hold the Left SOFT KEY and the Right SOFT KEY, and at the same time, use the stylus to press the RESET button at the bottom of your device.



Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.
  Reply With Quote
Old 19-02-09, 05:02 PM   #17
kushol
Freak Poster
 
kushol's Avatar
 
Join Date: Nov 2008
Location: WINDOWS++
Age: 36
Posts: 224
Status: Offline
Sonork:
Thanks: 33
Thanked 521 Times in 135 Posts
Rep Power: 9
kushol is on a distinguished road
Default Re: "All Smart Phones & PDA/PALM Hard & Soft Reset Key Total InfoHere with picture"

O2


O2 XDA Zinc

O2 XDA Zinc soft reset

Resetting your Xda Zinc
Use the stylus to press this (26) button to soft-reset your device.



O2 XDA Zinc hard reset

To perform a hard reset


For Hard Reset, press the navigation key UP and press the soft reset at the same time. Warning: All personal data stored in the device will be destroyed. It is recommended that do a backup before doing Hard Reset
  Reply With Quote
Old 19-02-09, 05:05 PM   #18
kushol
Freak Poster
 
kushol's Avatar
 
Join Date: Nov 2008
Location: WINDOWS++
Age: 36
Posts: 224
Status: Offline
Sonork:
Thanks: 33
Thanked 521 Times in 135 Posts
Rep Power: 9
kushol is on a distinguished road
Default Re: "All Smart Phones & PDA/PALM Hard & Soft Reset Key Total InfoHere with picture"

Palm Treo


Palm Treo 750

Soft reset
Instructions for the Treo 750:


1. If charging, disconnect your smartphone from its charger.
2. Turn off wireless mode by pressing and holding the red Power/End key .
3. Turn off the screen of your smartphone and wait a few seconds¹.
4. Open the Mini SD card slot cover (located on the side of the Treo 750) and locate the Reset button.
5. Using the stylus (located on the top right of the Treo 750) briefly press the tip of the stylus into the locating hole for the Reset button.



Hard reset If a soft reset doesn't solve your problem, you may need to perform a hard reset, which deletes all data on your device, including Outlook information and add-on applications.

Warning
Before performing a hard reset, please read the section below regarding what data is backed up during an ActiveSync synchronization and how to restore your data.

1. <LI class=items>A hard reset deletes all information and third-party software on your smartphone. <LI class=items>Never perform a hard reset without first trying a soft reset. <LI class=items>You can restore previously synchronized information the next time you sync.
2. Some third-party applications do not create a backup on your computer when you synchronize. If you perform a hard reset, you may lose data in these applications and you will need to reinstall the application after the hard reset. Please contact the developer to find out which data is backed up during synchronization.

Why perform a hard reset?
A hard reset can tell you whether a persistent problem stems from your smartphone or from an application installed on it. If you do not experience the problem after you perform a hard reset, the problem may be related to software you installed.
How to perform a hard reset

1. If charging, disconnect your smartphone from its charger.
2. Take off the battery door, but don't take out the battery yet.
3. Press and hold Power/End .
4. While holding Power/End, remove the battery for approximately one second, then replace it while still holding Power/End.
5. When you see "Erase all data?" you can release Power/End. Press Up to confirm the hard reset.
6. If a language selection screen appears, pick the same language you use in your desktop software.
  Reply With Quote
Old 19-02-09, 05:12 PM   #19
kushol
Freak Poster
 
kushol's Avatar
 
Join Date: Nov 2008
Location: WINDOWS++
Age: 36
Posts: 224
Status: Offline
Sonork:
Thanks: 33
Thanked 521 Times in 135 Posts
Rep Power: 9
kushol is on a distinguished road
Default Re: "All Smart Phones & PDA/PALM Hard & Soft Reset Key Total InfoHere with picture"

Palm Treo


Palm Treo 700w

Soft reset

A soft reset will restart your Treo smartphone. This comes in handy if your device freezes, crashes, shows an error message, or exhibits unexpected behavior.
This type of reset does not delete your personal data or the applications you've added. Instructions for the Treo 700w or 700wx:

1. If charging, disconnect your smartphone from its charger.
2. Turn off wireless mode by pressing and holding the red Power/End key .
3. Turn off the screen of your smartphone and wait a few seconds¹.
4. Take off the battery cover, then remove the battery for approximately one second.
5. Re-insert the battery and replace the cover.


Hard reset If a soft reset doesn't solve your problem, you may need to perform a hard reset, which deletes all data on your device, including Outlook information and add-on applications.

Warning
Before performing a hard reset, please read the section below regarding what data is backed up during an ActiveSync synchronization and how to restore your data.

1. <LI class=items>A hard reset deletes all information and third-party software on your smartphone. <LI class=items>Never perform a hard reset without first trying a soft reset. <LI class=items>You can restore previously synchronized information the next time you sync.
2. Some third-party applications do not create a backup on your computer when you synchronize. If you perform a hard reset, you may lose data in these applications and you will need to reinstall the application after the hard reset. Please contact the developer to find out which data is backed up during synchronization.

Why perform a hard reset?
A hard reset can tell you whether a persistent problem stems from your smartphone or from an application installed on it. If you do not experience the problem after you perform a hard reset, the problem may be related to software you installed.
How to perform a hard reset

1. If charging, disconnect your smartphone from its charger.
2. Take off the battery door, but don't take out the battery yet.
3. Press and hold Power/End .
4. While holding Power/End, remove the battery for approximately one second, then replace it while still holding Power/End.
5. When you see "Erase all data?" you can release Power/End. Press Up to confirm the hard reset.
6. If a language selection screen appears, pick the same language you use in your desktop software.
  Reply With Quote
Old 19-02-09, 05:16 PM   #20
kushol
Freak Poster
 
kushol's Avatar
 
Join Date: Nov 2008
Location: WINDOWS++
Age: 36
Posts: 224
Status: Offline
Sonork:
Thanks: 33
Thanked 521 Times in 135 Posts
Rep Power: 9
kushol is on a distinguished road
Default Re: "All Smart Phones & PDA/PALM Hard & Soft Reset Key Total InfoHere with picture"

Palm


Palm Z22

Resetting your handheld
On rare occasions your handheld may not respond when you press a button or tap the screen. In this case, you need to reset your handheld.
Doing a soft reset
A soft reset tells your handheld to stop what it’s doing and start over again. None of your
information will be lost. After a soft reset, a screen appears that lets you reset the date and time,
if needed.
To do a soft reset, use the tip of the stylus to gently press the reset button on the back of your
handheld.



If your handheld does not respond after a soft reset, you need to do a hard reset.
Doing a hard reset
Only do a hard reset if a soft reset doesn’t solve your problem, or if you want to clear all of your information from your handheld.
Important A hard reset deletes all records and entries stored on your handheld, including the username that identifies the handheld. This is another reason why it's important to
synchronize often, so you have an up-to-date backup of your information available. Before you do a hard reset, be sure to synchronize.

1. Press and hold the power button.
2. While holding the power button, use the tip of the stylus (or a similar object
without a sharp tip) to gently press and release the reset button inside the hole on the back of your handheld.
3. Wait for the Palm Powered™ logo to appear, and then release the power button.
4. When you see the message that warns you about erasing all of the info on your handheld, do one of the following:
• Press Up on the 5-way navigator to finish the reset and show the touchscreen.
• Press any other button to do a soft reset.
5. When prompted, tap to align the screen, and then select the language you want to use on your handheld. A screen appears showing the Palm logo and a progress bar.



When the Welcome screen appears, the hard reset is complete. Follow the instructions to set up your handheld.



  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
ALL Hard reset - Soft reset PDA SmartPhone ROCKY+++ Smartphones ( WM Without Touchscreen) 5 28-05-10 07:12 PM
*"*Free Mobiles MP4 Videos,Themes,Ringtones,Applications.*""* saadhome GSM Mobile Links 0 10-04-09 05:37 AM
All Smart Phones & PDA/PALM Soft & Hard Reset TUR@N ALAM Smartphones ( WM Without Touchscreen) 3 01-12-08 04:26 AM


All times are GMT +7. The time now is 10:24 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright DhakaMobile.com 2006-2016. All Rights Reserved.